Programmable Logic Device CPLD/FPGA Controller Chip GW1N-UV2LQ144XC6/I5

The GW1N FPGA of Gowin Semiconductor belongs to the LittleBee family Series 1 and has relatively high performance

Rich logical resources, supporting multiple I/O level standards, with embedded block static random access memory and digital

The signal processing module, phase-locked loop resources, and embedded Flash resources make it a non-volatile product

The FPGA products feature low power consumption, instant startup, low cost, high security and compact size

It features small size, rich packaging types, and convenient and flexible use.

Gao Yun Semiconductor provides a new generation of FPGA hardware development environment independently developed for the market, which can

It is capable of completing one-stop tasks such as FPGA synthesis, layout, routing, generating data stream files and downloading.

1.1 Feature Overview

<s:1> Low power - 55nm embedded flash process - LV version [1] : supports 1.2V nuclear power

Pressure-uv version: Supports device VCC/

VCCIO/ VCCX is powered by a single power supply

Note!

[1] GW1N-1S only supports the LV version; - Supports dynamic opening/closing of the clock

<s:1> User flash memory resources (GW1N-1 and.

GW1N-1S) -NOR Flash - 100,000 write cycles - data storage capacity of over 10 years

(+85℃) - Optional data input and output bit width

8/16/32 - Page storage space: 256-Byte - Standby current: 3μA - Page write time: 8.2ms

<s:1> User flash memory resources (GW1N

1P5/2/4/9) -NOR Flash - 10,000-write life cycle - data retention capacity of over 10 years

(+85℃) - Data bit width: 32 - GW1N-1P5/2 Storage capacity:

96K bits - GW1N-4 storage capacity: 256K

Bit-gw1n-9 storage capacity: 608K

bits - Page erasure capability: 2,048 bytes - Word programming time: ≤16μs - Page erasure time: ≤120

Configure flash memory resources (GW1N-1 and

GW1N-1S) -NOR Flash - 100,000 write cycles - data storage capacity of over 10 years

(+ 85 ℃)

<s:1> Configure flash memory resources (GW1N

1P5/2/4/9) -NOR Flash - 10,000-write life cycle - data retention capacity of over 10 years

(+ 85 ℃)

Hardcore MIPI D-PHY RX(GW1N-2) - supports MIPI DSI and MIPI CSI

2 RX device interfaces - CS42, CS42H, QN48H

IO in QN88 and MG132H packages

Bank6 supports MIPI D-PHY RX-MIPI transmission rate with single-channel reach

2Gbps - Supports up to four data channels and one

A clock channel

<s:1> GPIO supports MIPI D-PHY RX/TX - supports MIPI CSI-2 and MIPI

DSI, RX and TX device interfaces

The transmission rate can reach a single channel

1.2Gbps - Three IO types are available for selection:

TLVDS, ELVDS, MIPI IO

Supports multiple I/O level standards - LVCMOS33/25/18/15/12;

LVTTL33, SSTL33/25/18

I, SSTL33/25/18 II

"SSTL15; HSTL18 I

HSTL18 II, HSTL15 I;

PCI, LVDS25, RSDS

LVDS25E, BLVDSE

MLVDSE, LVPECLE

RSDSE - Provides input signal hysteresis options - provides output signal drive current options - offers an independent Bus for each I/O

Keeper, pull-up/pull-down resistor and

Open Drain output option - Supports hot plugging

<s:1> High-performance DSP module (GW1N-4/9) - high-performance digital signal processing capability - supports 9 x 9, 18 x 18, 36 x

A 36-bit multiplication operation and a 54bit accumulation

Adder - Supports multiple multiplier cascades - Supports register pipelines and bypass work

It can - pre-add operation to achieve filter function - support bucket-shaped shift registers

Youdaoplaceholder0 Rich basic logic units - 4 input LUT(LUT4) - supports shift registers and distributed memory

Storage device

Supports multiple modes of static random access memory - supports dual-port, single-port and pseudo

Dual-port mode - Supports byte write enabling

Youdaoplaceholder0 Flexible PLL resources - achieve clock doubling, frequency division and phase

Shift - Global clock network resources

Built-in Flash programming - Instant startup - support for secure bit operations - support AUTO BOOT and DUAL

BOOT programming mode

<s:1> Programming configuration mode

Supports JTAG configuration mode - Supports background upgrade - Supports up to 7 types

GowinCONFIG configuration mode

AUTOBOOT, SSPI

MSPI, CPU, SERIAL

DUAL BOOT, I2C Slave

Packaging and transportation instructions

- According to the standard export packaging.

Customers can choose from cartons, wooden cases and wooden pallets according to their own requirements.

Q&A

1. How to obtain the price?

We usually quote within 24 hours after receiving your inquiry (except weekends and holidays). If you are in urgent need of a price, please send us an email or contact us in any other way so that we can provide you with a quotation.

2. What is your delivery time?

This depends on the quantity of the order and the season in which you place the order. Usually, we can ship the goods within 7 to 15 days (for small batches), and for large batches, it takes about 30 days.

3. What are your payment terms?

Factory price, 30% deposit, 70%T/T payment before shipment.

4. What is the mode of transportation?

It can be transported by sea, air or express delivery (EMS, UPS, DHL, TNT, FEDEX, etc.). Please confirm with us before placing an order.

5. How do you help our business establish a long-term and good relationship?

We maintain good quality and competitive prices to ensure that our customers benefit.

2. We respect every customer as our friend. We do business with them sincerely and make friends with them, no matter where they come from.